| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Double Sides Inline Chute Magnetic Separator
The inline magnetic separator are a compact, efficient in-line magnetic separator for extracting ferrous metal contamination from either gravity fed or pneumatic pipelines. they are normally installed in the feed lines such as at the outlet of elevator,screw conyeyor ect, often for food powders and other granular material, and intake lines with high velocity where abrasive products (such as wheat,Plastic particles) can present a problem.this series of product is specialized in automatically separating the irons in the pipeline,which enhance the product quality.It is widely used in nonferrous metal,cement,coal,chemicals,building materials,food and other industries.Iron cleaning work is done by workers regularly.
The magnets are positioned in such a way as to give good access, as they need to be cleaned regularly.
To clean the magnet,we offer the quick release swing bolts. On larger applications where the pressure is low (or gravity fed) the magnet is attached to a round door which swings out. The magnet is then cleaned manually and replaced. For flour lines with iron additive, we recommend a strong gauss so that the iron additive is not removed from the product.
The separator is manufactured from stainless steel, and the dry, free-flowing product flows through the body and over the bullet magnet which extracts the contamination. The magnetic separators can be horizontal as well as vertical, the flow being up or down. Internal deflectors ensure that the product is diverted over the bullet magnet with minimal turbulence and no blockage.
Company Information
other mainly products of Fushun Ejet
1.magnetic sorting equipment :removing ferrous metals(iron/steel) from shredder residue and split into two different fractions.to purify free-flowing powders and granular materials or concentrate and reclaim products in material. such as powerful Electromagnetic Drum , Suspension type magnetic separator and high deep magnetic fields Magnetic Pulley
This rugged, effective and reliable copper & aluminium eddy curent sorting equipment are increasingly used wherever separation of non-ferrous metals from a product stream(such as plastics, glass, electronic scrap, automobile shredder residue, bottom ash, foundry sand, trash, co-mingle recyclables etc). can give a more valuable product, whether the end use is in recycling, waste reduction, raw material production or any other process whereby separation is beneficial.
3.Induction sorter It is normally being installed after eddy current in order to recover rest of metal after eddy current sorting such as copper, brass, zinc, aluminum and those could not be sorted by eddy current as stainless steel and insolation wire etc.
A vibratory feeder and trommel screen often working together the Eddy Current separator and Induction sorter to spreading out and further separating the remaining metals to allow the metal separator to work at its optimal efficiency get the ideal metal separation. and the conveyor system also included in our whole sorting system
|
Recycling and waste processing
|
Machining and foundry industry
|
Thermal power plants
|
Paper industry
|
Tobacco industry
|
|
Ceramic and glass industry
|
Mining and quarrying industry
|
Cement and lime industry
|
Chemical industry, paints and lacquers
|
Wood industry
|
OTHER PRODUCTS
|
|
|
|
|
|
|
|
|
|
|
|
17 YEARS FOCUS ON MAGNETIC SEPARATOR
20% ENGINEERS IN EJET OBTAIN MORE AND MORE NATIONAL PATENT
30 YEARS EXPERIENCE OF IN MACHINE DESIGNING
3000 SETS PRODUCTS HAD BEEN MANUFACTURED
24 HOURS AFTER-SALES SERVICE
This was in 2004, when our founder, Mr. Wang, first used magnetism knowledge to make research and designed the first set eccentric pole eddy current separator in China. Thus we are fully aware of this responsibility in sorting resources field for nonferrous metal.
In the year 2006, with 25 years of magnetic experience, Ejet Magnet was Established. Keeping improvement for all kinds of magnetic separators, to provide high-quality and high-performance products is our own responsibility, moreover, offering the best solution and the most effective service is one of the higher-standard targets we are pursuing. Ejet has a strict quality control system for raw materials inspection, producing quality inspection, and machine testing.
With 4 members team, in the beginning, Ejet has grown through continuous product innovation and worldwide expansion to over 5000 square feet of manufacturing space and more than 100 employees.
The main products eddy current separators, magnetic separators, sensor sorters and AI technology machines for recycling industries had been exported to more than 50 countries.
Materials testing and machines OEM could be available for better solutions for metal recycling, plastic, glass cullet, construction waste, incineration bottom ash, Aluminum, and E-waste recycling. Also for food, chemical, and lithium battery industries.
Ejet after-sales service promises that within 15 minutes we will make a response to the customer. On the condition that some problems cannot be solved by calls or call videos, engineers are available to serve overseas.
Each Perfect Separation is EJET's commitment to you! We constantly pay attention to your separation result.
Ejet had been focused on magnetic separator design, and manufacturing for more than 17 years with rich experience. Ejet has been dealing with the construction of machines for bulk material handling.
Ejet® is a One-stop Source for Recycling Equipment used in Material Recovery Facilities, conveyors, Screening, and Magnetic Technology for all kinds of industry fields: Automotive Shredder Residue (ASR). Municipal Solid Waste. Incineration Bottom Ash. Mining Magnet.
1. Q: What kind of metal is the eddy current separator applied to?
A: Eddy Current Separator suitable for aluminum, copper, and brass.etc non-ferrous scraps separation from non-metal materials of size >3mm.
2. Q: Which type should I use for my recycling plant?
A: In order to recommend the most suitable model, please let us know the material`s situation. Including the composition, size, handling capacity and expected separation result.
3. Q. What is the MOQ of your machine?
A: Our MOQ is 1 set
4. Q: What are the pros and cons of a concentric pole rotor compared with and eccentric rotor design?
A: The eccentric type is much more suitable for the complicated material situation, The eccentric rotor design reduces long-term wear due to heated ferrous build up, and can effectively avoid the device damage caused by impurity ferrous metal.
Exclusive the ferrous influence, the concentric type has a little bit better separation effect but must make sure no ferrous exist.
5. Q. How long is the machine warranty period?
A: the product warranty period is 12 months
For details, or for longer the machine Warranty Period.
){kind=link}