| Customization: | Available |
|---|---|
| Type: | Circular |
| Function: | High Frequency Vibrating Screen |
|
Still deciding? Get samples of US$ 10000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Construction and Demolition (C&D) debris accounts for a significant portion of the waste going to local landfills.
Common Construction and Demolition (C&D) debris is a type of waste that is not included in municipal solid waste (MSW). Materials included in the C&D debris generation estimates are steel, lumber, drywall, metals, masonry (brick, concrete, etc.), carpet, plastic, pipe, rocks, dirt, paper, cardboard, or green waste related to land development. These materials are used in buildings, roads and bridges, and other sectors.
Scrap lumber or wood can be processed and used for landscaping, compost, animal bedding, boiler fuel, or engineered building products.
Metals such as aluminum, copper, steel, iron and brass can be sold to scrap metal yards. These are some of the easiest and most cost-effective materials to recycle.
Eddy current separator+Magnetic separator+HISC+Sensor sorter
Cardboard can be isolated in the cardboard-only dumpster at the job site and picked up by a local recycling firm.
Gypsum drywall can be collected for use as a soil amendment or a substitute for lime on lawns.
Rubble (concrete, bricks, cinder block, and certain types of tile) can be crushed and sieved for use as an aggregate. For example, it can substitute for stone aggregate in non-construction applications. Crusher+Trommel screen
In a shredder system commonly designed for c&d recycling. the shredded material is subjected to air separation before the separation of steel and iron material. Air separator
Glass can be recycled into fiberglass or used in place of sand in paving material.
EJET`s whole metal recycling equipment separates metal scraps and waste
Mainly machine
1. Air classification machine :in a shredder system commonly designed for vehicles, the shredded material is subjected to air separation before the separation of steel and iron material. This creates a light fraction capable of flight, known as the shredder light fraction (SLF). The heavy items from the air separation is - after separation of iron - the shredder heavy fraction (SHF). Air classifiers are commonly employed in industrial processes where a large volume of mixed materials with differing physical characteristics need to be separated quickly and efficiently.
2. magnetic separator:the model selection depends on the ferrous content.it is may be a suspension overband magnetic separator ,a drum magnetic pulley or just a magnetic plate can fulfil the task for Magnetic metal recovery
3.Trommel screen : Trommel screen, or rotary screen, is a kind of mechanical screening machine which is widely used in the separation operation. It controls the material separation by the particle size, and the separation precision is high. The cylinder of the trommel screen is generally divided into several sections, depending on the specific situation. The mesh holes are arranged from small to large, and the mesh hole diameter on each section is the same.
Trommal screen applications:
Trommel screens are used by the municipal waste industry in the screening process to classify sizes of solid waste.Besides that, it can also be used to improve the recovery of fuel-derived solid waste. In addition, trommel screens are used for the treatment of wastewater.
Trommel screens are also used for the grading of raw materials to recover valuable minerals.The screen will segregate minuscule materials which are not in the suitable range of size to be used in the crushing stage. It also helps to get rid of dust particles which will otherwise impair the performance of the subsequent machineries in the downstream processes.
Other applications of trommel screens can be seen in the screening process of composts as an enhancement technique. It selects composts of variable size fractions to get rid of contaminants and incomplete composted residues, forming end products with a variety of uses. Besides this, the food industries use trommel screens to sort dry food of different sizes and shapes. The classification process will help to achieve the desired mass or heat transfer rate and avoid under or over-processing. It also screens tiny food such as peas and nuts that are strong enough to resist the rotational force of the drum.
| Model | Power (kw) | Drum Diameter (mm) | Drum Length (mm) | Screen Size (mm) | Dimension (mm) |
| GTS1020 | 3 | 1000 | 2000 | 3-10 | 3000*1400*2145 |
| GTS1225 | 4 | 1200 | 2500 | 3-10 | 3460*1400*2145 |
| GTS1530 | 5.5 | 1500 | 3000 | 3-10 | 4460*1900*2820 |
| GTS1545 | 7 | 1500 | 4500 | 3-10 | 5960*1900*3080 |
| GTS1848 | 11 | 1800 | 4800 | 3-10 | 6500*2300*4000 |
| GTS2055 | 15 | 2000 | 5000 | 3-10 | 7500*2500*4000 |
4. Eddy current separator :
To then separate the majority of recoverable non-ferrous metals by eddy current separators .Even under the toughest operating conditions our non-ferrous metal separators with eccentric magnetic pole systems have reliably separated a high-grade non-Fe metal fraction (ZORBA).
The principle of the eddy current separator is fairly straightforward. Basically, a rotor comprised of magnet blocks, either standard ferrite ceramic or the more powerful rare earth magnets depending on application, are spun at high revolutions (over 3000 rpm) to produce an 'eddy current'. This eddy current reacts with different metals, according to their specific mass and resistivity, creating a repelling force on the charged particle. If a metal is light, yet conductive such as aluminum, it is easily levitated and ejected from the normal flow of the product stream making separation possible. .
eddy current separators commonly used to separate non-ferrous metals from mixed waste and other product streams. When a magnetic rotor is turned at high rates of speed, powerful forces called eddy currents are created.
These eddy currents repel materials with varying degrees of force depending on their composition. Thus, able to separate and recover aluminum and other non-ferrous metals from household, industrial and incinerated waste, including inert plastics and other materials. It is able to separate metals from scrap, and remove metallic particles and contaminants from glass and other substances. In fact, eddy current separators offer a cost effective method of recovering up to 95% of valuable material from rubbish and waste, grading precious metal concentrates for further processing. It also improves the purity of non-ferrous auto scrap up to 85-95%, maximizing the speed and efficiency of recovery and increasing profits.
5. Induction stainless steel sorter
Induction sorter is detecting the inductive metal such as copper , aluminum, Zinc, Lead, stainless steel, print circuit board(PCB) and insolation wire etc through the imbed induction sensor under the belt. With high pressure valve connected one line of nozzle after the high speed belt, eject those detected objects, the inductive of sensor could be adjusted through software via the screen.
It is normally being installed after eddy current in order to recover rest of metal after eddy current sorting such as copper, brass, zinc, aluminum and those could not be sorted by eddy current as stainless steel and insolation wire etc.
Metal recycling system to separate meral scraps (such as aluminum,copper, steel ,Stainless steel, copper, brass metals )from shredder residue and fluff, wildy used in municipal recycling facility (MRF) municipal solid waste facility (MSW), scrap residue and other recyclables(auto shredding residue operations, glass cullet, electronic scrap, UBC reclamation, etc)
Induction sorter is detecting the inductive metal such as copper , aluminum, Zinc, Lead, stainless steel, print circuit board(PCB) and aluminum copper insolation wire etc through the imbed induction sensor under the belt. With high pressure valve connected one line of nozzle after the high speed belt, eject those detected objects, the inductive of sensor could be adjusted through software via the screen.
It is normally recovery of residual metals from a mix of materials that cannot be separated by magnetic and Eddy current nonferrous separation system. It is especially suitable for stainless steel zurik scraps,insolation wire, cables and circuit boards composite metals
Typically Working plant of electro-magnetic induction Sensor Sorter
Municipal Solid Waste // Household Waste //Incineration Bottom ash generated in Waste-to-Energy // Refuse-Derived Fuel(RDF)
Auto ShredderResidue (ASR)
Waste Electrical and Electronic Equipmen WEEE scraps
Construction and Demolition Waste (C&D)
Scrap Metal Processing
Advanced Metal Recovery
Product advantage
Advance hardware worldwide
Advance software and pneumatic system
Excellent performance guarantee in terms of high purity and high recovery rate
Higher throughput than similar equipment
Adjustable inductive to adapt different metal sorting
More Recommendation
For STAINLESS STEEL you can also consider our SUPER-MAGNETS
This Stainless-Steel Magnetic Separator is unique Neodymium Rare Earth magnetic roller that produces an ultra-strong magnetic force to attract even the micro iron or para-magnetic weakest magnetic materials ( such as silica , sulfur dioxide , stainless steel ) . The strength of the magnetic field is far greater than standard magnetic separators, extending the separation capabilities from just removing ferrous and strongly magnetic materials to materials that have a very low magnetic susceptibility. it is in fact able to capture and separate most of the types of stainless steel present in other materials, in particular in plastic and other metals from medium and fine inert fraction .The separation is constant, precise and reliable even for very small stainless steel.
Scap metal sorting system in bulky-waste crush line to ensure the optimum recovery of valuable metal, ferrous and nonferrous, coarse or fine from shredded city recyclable waste. the effcient and effectivily magnetic metal sorting equipment composed by 3 parts:
EJET Overbelt magnetic separators are suspended on gantries above a conveyor belt installation to extract ferrous content from conveyed loads before they reach further downstream processing
|
Magnetic Separator |
|||
|
Intruduction: |
Magnetic Separator can remove iron from other material | ||
|
Parts |
Overband Magnetic Separator |
||
|
Production Capacity: |
98.5% - 99.5% |
Belt Width: |
800 |
|
Long*Wide*High:(mm) |
2350*1260*732 |
Weight: |
1259kg |
|
Warranty: |
18 months |
High of Suspension : |
250mm |
|
Magnetic Field: |
>700Gs |
Rotor of Motor: |
2.2kw |
|
Brand Name: |
JSYY |
Modle: |
RCYD-80 |
|
Certification: |
CE / SGS / ISO |
||
Company Information
){kind=link}