Electro-Magnetic Sensor-Based Induction Sorters for Metal Recovery

• Customization: Available
• After-sales Service: Spare Parts Will Providing by Free in The Gurantee
• Warranty: 1year
• Automation: Automatic
• Certification: CE
• Transport Package: Nude in Container
• Specification: ISS60 ISS1200 ISS1800 ISS2400
• Trademark: JSYY Fushun Ejet
• Origin: Fushun Liaoning, China
• Production Capacity: 50sets Per Month

Product Description

Induction sorter is detecting the inductive metal such as copper , aluminum, Zinc, Lead,  stainless steel, print circuit board(PCB) and aluminum copper insolation wire etc through the imbed induction sensor under the belt. With high pressure valve connected one line of nozzle after the high speed belt, eject those detected objects, the inductive of sensor could be adjusted through software via the screen. 

 

It is normally recovery of residual metals from a mix of materials that cannot be separated by magnetic and Eddy current nonferrous separation system.  It is especially suitable for stainless steel zurik scraps,insolation wire, cables and circuit boards composite metals

Typically Working plant of electro-magnetic induction Sensor Sorter 

Municipal Solid Waste // Household Waste //Incineration Bottom ash generated in Waste-to-Energy // Refuse-Derived Fuel(RDF)

Auto ShredderResidue (ASR)

Waste Electrical and Electronic Equipmen WEEE scraps 

Construction and Demolition Waste (C&D)

Scrap Metal Processing

Advanced Metal Recovery
 

Product advantage  

Advance hardware worldwide 

Advance software and pneumatic system

Excellent performance guarantee in terms of high purity and high recovery rate 

Higher throughput than similar equipment 

Adjustable inductive to adapt different metal sorting

 

More Recommendation 

For STAINLESS STEEL you can also consider our SUPER-MAGNETS

This Stainless-Steel Magnetic Separator is unique Neodymium Rare Earth magnetic roller that produces an ultra-strong magnetic force to attract even the micro iron or para-magnetic weakest magnetic materials ( such as silica , sulfur dioxide , stainless steel ) . The strength of the magnetic field is far greater than standard magnetic separators, extending the separation capabilities from just removing ferrous and strongly magnetic materials to materials that have a very low magnetic susceptibility. it is in fact able to capture and separate most of the types of stainless steel present in other materials, in particular in plastic and other metals from medium and fine inert fraction .The separation is constant, precise and reliable even for very small stainless steel.

 

                                                   Stainless steel & weakly magnetic micro-fines                           non metallic material 

Scap metal sorting system in bulky-waste crush line to ensure the optimum recovery of valuable metal, ferrous and nonferrous, coarse or fine from shredded city recyclable waste. the effcient and effectivily magnetic metal sorting equipment composed by 3 parts:

GRAIN SIZE
The grain size of material has a huge impact on sorting performance. Too small grain size will cause the metal to be undetected, and too large grain size will inflfluence the sorting effificiency due to mechanical limitations.
The grain size of material within a single sorting task should keep its range within 3 times. A wider range of grain size distribution may result in the poor of sorting performance. Recommended grain size of material is 10 to 120 , and divided to 3 groups of [10-30], [30-50], and [50-120].
A vibratory feeder and trommel screen often working together the Eddy Current separator and Induction sorter to spreading out and further separating the remaining metals to allow the metal separator to work at its optimal efficiency get the ideal metal separation. and the conveyor system also included in our whole sorting system 

LIGHT FRACTION REMOVAL

Dust and the light fraction will be disturbed during the separation processing by air turbulence inside the catch hood causing by the compressed air ejection. A good sorting performance requires the dust and light fraction to be removed properly before feeding into the equipment.

 

METAL SORTING AND RECOVERY

1.Magnetic Sorting Equipment :removing ferrous metals(iron/steel) from shredder residue and split into two different fractions.to purify free-flowing powders and granular materials or concentrate and reclaim products in material. such as powerful Electromagnetic Drum , Suspension type magnetic separator and high deep magnetic fields Magnetic Pulley

2.The non-ferrous metal sorting system of scrap and crushed materials ,Eddy Current aluminium/copper separator:repel non-ferrous metals(such as aluminum, die-cast metal, copper,zinc and other value metals)from incoming materials get the high levels of purity and highest value product. 

This rugged, effective and reliable copper & aluminium eddy curent sorting equipment  are increasingly used wherever separation of non-ferrous metals from a product stream(such as  plastics, glass, electronic scrap, automobile shredder residue, bottom ash, foundry sand, trash, co-mingle recyclables etc). can give a more valuable product, whether the end use is in recycling, waste reduction, raw material production or any other process whereby separation is beneficial.

3.Induction sorter It is normally being installed after eddy current in order to recover rest of metal after eddy current sorting such as copper, brass, zinc, aluminum and those could not be sorted by eddy current as stainless steel and insolation wire etc.The input capacity is decided by how much metal content in the input material. The input capacity will drop signifificantly if the percentage of metal content goes too high. Notice that the input capacity must be lower while the metal content goes higher. A reasonable range of metal content is 5 to 20% for "All-Metal" sorting, and 45 to 85% for stainles steel sorting.

About us 
This was in 2004, when our founder, Bingxun Wang, first used the magnetism knowledge to make research and designed the first set eccentric pole eddy current separator in China. Thus we are fully aware of this responsibility in sorting resources field for nonferrous metal.
In the year 2006, with 25 years magnetic experience Ejet Magnet Established, Keeping improvement for all kinds of magnetic separators, to provide high quality and high performance products is our own responsibility, moreover, to offer the best solution and the most effective service is one of higher-standard targets we are pursuing. Ejet has strict quality control system for raw materials inspection, producing quality inspection and machine testing.     
With 4 members team in the beginning, Ejet has grown through continuous product innovation and worldwide expansion to over a 5000 square feet of manufacturing space and more than 100 employees.
The main products eddy current separator , magnetic separator, induction sorters and AI technology machine for recycling industries had been export to more than 50 countries.
Materials testing and machines OEM could be available for better solutions of metal recycling, plastic, glass cullet, construction waste, incineration bottom ash, Aluminum, E waste recycling. Also for food, chemical, lithium batteryindustries.
Ejet after sales service promise that within 15miniutes we will make response to customer's consolations. On condition that some problems cannot be solved by calls or call videos, engineers are available to serve overseas.