| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Type: | Metal Recycling |
| Automation: | Automatic |
| Certification: | ISO, CE |
| General Names: | Magnetic Eddy Current Separator |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Automatic magnetic eddy current metal Sorting System offer a cost effective method of recovering up to 98% of valuable material from waste scaps. It also improves the purity of non-ferrous auto scrap up to 98-99%.
And for bottome ash from energetic usage waste incinerators of municipal solid waste contains up to 90% mineral traces, 4-8% ferrous metals and roughly 2% non-ferrous metals. To make the exploitation of bottom ash possible, the most complete possible separation of the metal components is essential.
sorting heavy non-ferrous metals (Zebra) from incineration bottom ash (IBA) or automotive shredder residues (ASR) will welcome this innovation. The objective of sorting remains the same, namely to separate and upgrade non-ferrous heavy metals into metal types such as aluminium, copper, zinc, brass or stainless steel. But now the fine-grain fraction can be processed too.
Working Principle of non-ferrous recycling machine :
An Eddy Current Separator consists of a short belt conveyor that has its drive located at the return end and a high speed magnetic rotor system installed at the discharge end. The magnetic rotor, which is positioned within a separately rotating non-metallic drum, revolves at around 3000 rpm during operation while the outer drum cover rotates at the speed of the Eddy Currents' belt conveyor.
As the rotor spins at these high speeds, an electric current is induced into conducting metals. The induced electric current produces a magnetic field, which opposes the field created by the rotor, repelling the conducting metals over a pre-positioned splitter plate. The remaining materials such as plastics, glass and other dry recyclables will simply free-fall over the rotor, separating them from the repelled metals.
Important: When the waste(those that don't contain ferrous particles) travelling over the magnetic must be in a thin layer to allow the magnetic perform to its best, in case processed metal waste is mixed with ferrous metal. The Ideal format for any metal separation is first magnetic ferrous discharge, onto a vibration conveyor to spread out and further separate the remaining metals to allow the Eddy current magnetic to work at its optimal efficiency.
Specification of eccentric eddy current aluminm recycling machine
Other mainly Application of eddy currents scraps non-ferrous metallurgy recycling machine
1.For non-ferrous recovery in various industries
Shredded End-of-Life vehicle (ELVs) recycling industry
Shredded End-of-Life domestic application
auto shredder residue(ASR)recycling
shredded and pre-treated co-mingle recyclables metal (Zorba) recycling industry
slags recycling that produced by waste incineration facilities
steel slag scraps recycling industry
crushed Bulky city waste recycling
non-ferrous dross recovery from foundry sand in aluminum-shell-sand recycling lines.
non-ferrous scrap from crushed waste electrolytic capacitors
2.For harmful mixed aluminum copper non-ferrous scraps removal .
to improve the taste make sure material`s purification
aluminum caps and rings removal from cullet in glass recycling
aluminum separation in UPVC window recycling.
Brass rivets and hinges separation in timber recycling industry.
Mixed aluminum flakes separation in plastic recycling industry
fixed aluminu scraps separation from crushed rubber .
|
|
||
|
aluminum/copper caps and rings separated from crushed glass bottles scrap |
aluminum/copper recovery from recyclable plastic scrap |
aluminum removal from rubber scraps/powder |
|
||
| UBC(used drink metal cans) sorting |
aluminum scrap recovery from molding sand |
to Separate non-ferrous metals from wood waste |
RFQ
Q:What kind of metal is eddy current applied to?
A:Eddy Current Separator suitable for aluminum, copper, brass.etc non-ferrous scraps separation from non - metal materials of size >3mm.
Q: Which type should I use for my recycling plant?
A: In order to recommend the most suitable model, please let us know the material`s situation .including the composition , size ,handling capacity and expected separation result .
Q:What are the pros and cons between a concentric pole rotor compared with and eccentric rotor design?
A: The eccentric type is much suitable for complicated material situation , The eccentric rotor design reduces long-term wear due to heated ferrous build up ,can effectively avoid the device damage caused by impurity ferrous metal.
Exclusive the ferrous influence , the concentric type have a little bit better separation effect,but must make sure no ferrous exist.
Any metal solution , please feel free contact with us
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}