| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Year, 1 Years |
| Type: | Magnetic Separator, Metal Recycling |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Whether it's plastic flakes, pellets or whole plastic bottles, Ejet offers solutions for the removal of ferrous, non-ferrous and stainless steel metal contamination. are for further processing to be manufactured into recyclate ground material or fibers.
Shredded PET is processed over special magnetic separation system (Eddy current separators ECS with magnetic separation devices fitted to ) to remove small, fingernail-sized ferrous . aluminum ,and removes weakly magnetic stainless steel fragments (from cans and bottle cap). provide superior metals removal in recycled PET bottle and regrind recycling applications. could effectivily make the aluminum, brass, bronze, copper and other metallic removed from the post-consumer PET beverage containers bottles recycling stream. also extremely effective for Plastic Flake and Regrind Recycling.
Mainly operation to removal harmful Metal In Plastic Waste
Early in the process, ferrous and non-ferrous metal contamination is removed from the waste plastic using Magnetic Separators and Eddy Current Separators. Initially, after the plastic is released from the compacted bale, the waste is fed into a primary shredder. To protect the shredder from damage, an Overband Magnet is suspended across the feed conveyor and removes large ferrous metal.
At this stage, the type of ferrous metal contamination found in the plastic is diverse and often surprising. It can include metal packaging miss-sorted at the MRF, heavy lumps of iron that increase the weight of the plastic bale, and metal picked up during transportation. There have even been reports of car engine blocks. Reasonably sized items of cast iron entering the shredder will cause significant and costly damage and result in the plant being closed until a repair is possible.
After the primary shredder, the waste plastic has been reduced in size and many contaminants liberated. This shredded waste plastic is fed onto another Magnetic Separator, commonly a Drum Magnet or Pulley Magnet, to remove liberated smaller ferrous metals.
Spanner after passing through and damaging a shredder
The type of ferrous metal separated at this stage includes steel spanners, nuts, bolts, screws, fine metal wires, springs, iron shards, fine ferrous dust, and chunks of stainless steel. Most of the ferrous metal was not part of the original plastic packaging and has been introduced between disposal and processing.
The cleansed plastic waste then passes over a high intensity concentric Eddy Current Separator to remove fine non-ferrous metals. Commonly separated metals include aluminium beverage cans, foils, tubes, and even window frames.
After the metal contamination has been removed, the plastic waste moves to the next stage in the plant, which could be further separation of contamination or sorting by colour or plastic type.
| Self-cleaning overhead suspension magnets often work together with a permanent Magnetic Pulley unit and the robust Magnetic Drums (or enclosed type) offer the highest separation efficiency along with outstanding functionality and robustness. wide variety of powerful Rare Earth Magnetic Separators to capture and hold ferrous and weakly magnetic stainless steel from the mixture |  |
Powerful Grate magnet & ultra intensity roll incorporates extremely high Gauss fields, neodymium rare earth magnets to hold and extract iron and paramagnetic 300 stainless steel metal and Wire-Cleaning Applications for product stream protection against fine and tramp metal contamination. widely used in abrasive materials, plastic, silicon sand, medicine, glass, founding, building material, special material, metal and electronic products grade, resources recovery and so on. The first stage of separation focused on removing magnetic particles with a high-intensity Rare Earth Drum Magnet. Magnetics accounted for approximately 1 %. Removing the magnetics is beneficial to subsequent processing |
|
The Eddy Current Separator is ideal for separating and throwing smaller, conductive, non-ferrous materials, such as aluminum, copper, brass and zinc plate. Ultra High-frequency model (UHF/HFEC) significantly improved separation of small and finest metallic particles from plastics and other non-metallic particulate. typical suitable for PET /PETE recycling that has great requirements for the material`s purification. With the new eddy current separator, a recycler can obtain a single pass aluminum reduction of up to 92 percent and achieve a clean PET yield of between 97-99 percent |
|
Working plant for plastic recycling
Except in recycled plastic processing, EDDY CURRENT NON-FERROUS METAL SEPARATORS PERMANENT RARE EARTH MAGNETIC Removes non-ferrous metallics from: • plastics • glass cullet • electronic scrap • automobile shredder residue (ASR) • boiler bottom ash • spent foundry core sand • municipal solid waste (MSW) • co-mingled recyclables • urban wood waste • mixed
This was in 2004, when our founder, Mr. Wang, first used magnetism knowledge to make research and designed the first set eccentric pole eddy current separator in China. Thus we are fully aware of this responsibility in sorting resources field for nonferrous metal.
In the year 2006, with 25 years of magnetic experience, Ejet Magnet was Established. Keeping improvement for all kinds of magnetic separators, to provide high-quality and high-performance products is our own responsibility, moreover, offering the best solution and the most effective service is one of the higher-standard targets we are pursuing. Ejet has a strict quality control system for raw materials inspection, producing quality inspection, and machine testing.
With 4 members team, in the beginning, Ejet has grown through continuous product innovation and worldwide expansion to over 5000 square feet of manufacturing space and more than 100 employees.
The main products eddy current separators, magnetic separators, sensor sorters and AI technology machines for recycling industries had been exported to more than 50 countries.
Materials testing and machines OEM could be available for better solutions for metal recycling, plastic, glass cullet, construction waste, incineration bottom ash, Aluminum, and E-waste recycling. Also for food, chemical, and lithium battery industries.
Ejet after-sales service promises that within 15 minutes we will make a response to the customer. On the condition that some problems cannot be solved by calls or call videos, engineers are available to serve overseas.
Each Perfect Separation is EJET's commitment to you! We constantly pay attention to your separation result.
Ejet had been focused on magnetic separator design, and manufacturing for more than 17 years with rich experience. Ejet has been dealing with the construction of machines for bulk material handling.
Ejet® is a One-stop Source for Recycling Equipment used in Material Recovery Facilities, conveyors, Screening, and Magnetic Technology for all kinds of industry fields: Automotive Shredder Residue (ASR). Municipal Solid Waste. Incineration Bottom Ash. Mining Magnet.
17 YEARS FOCUS ON MAGNETIC SEPARATOR
20% ENGINEERS IN EJET OBTAIN MORE AND MORE NATIONAL PATENT
30 YEARS EXPERIENCE OF IN MACHINE DESIGNING
3000 SETS PRODUCTS HAD BEEN MANUFACTURED
24 HOURS AFTER-SALES SERVICE
1. Q: What kind of metal is the eddy current separator applied to?
A: Eddy Current Separator suitable for aluminum, copper, and brass.etc non-ferrous scraps separation from non-metal materials of size >3mm.
2. Q: Which type should I use for my recycling plant?
A: In order to recommend the most suitable model, please let us know the material`s situation .including the composition, size, handling capacity and expected separation result.
3. Q. What is the MOQ of your machine?
A: Our MOQ is 1 set
4. Q: What are the pros and cons of a concentric pole rotor compared with and eccentric rotor design?
A: The eccentric type is much more suitable for the complicated material situation, The eccentric rotor design reduces long-term wear due to heated ferrous build up, and can effectively avoid the device damage caused by impurity ferrous metal.
Exclusive the ferrous influence, the concentric type has a little bit better separation effect but must make sure no ferrous exist.
5. Q. How long is the machine warranty period?
A: the product warranty period is 12 months
For details, or for longer the machine Warranty Period.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}